View E22-3C90-A400-E_4577625.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FERROXCUBE
DATA SHEET
E22/6/16 Planar E cores and accessories
Supersedes data of September 2004 2008 Sep 01
Ferroxcube
Planar E cores and accessories
CORES Effective core parameters of a set of E cores SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 0.414 2550 32.5 78.3 78.3 6.5 UNIT mm -1 mm 3 mm mm 2 mm 2 g
handbook, halfpage
E22/6/16
21.8 0.4 16.8 0.4 5 0.1 3.2 0.1 5.7 0.1
15.8 0.3
R 0.8 (12x)
Dimensions in mm.
MBE646
Fig.1 E22/6/16.
Effective core parameters of an E/PLT combination SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of plate VALUE 0.332 2040 26.1 78.5 78.5 4 UNIT mm -1 mm 3 mm mm 2 mm 2 g
2.5 0.05
handbook, halfpage
21.8 0.4
Ordering information for plates GRADE 3C90 3C92 3C93 3C94 3C95 3C96 3F3 3F35 3F4 3F45 3E6 2008 Sep 01 TYPE NUMBER PLT22/16/2.5-3C90 PLT22/16/2.5-3C92 PLT22/16/2.5-3C93 PLT22/16/2.5-3C94 PLT22/16/2.5-3C95 PLT22/16/2.5-3C96 PLT22/16/2.5-3F3 PLT22/16/2.5-3F35 PLT22/16/2.5-3F4 PLT22/16/2.5-3F45 PLT22/16/2.5-3E6 2
Dimensions in mm.
R 0.8
MBE654
15.8 0.3
Fig.2 PLT22/16/2.5.
Ferroxcube
Planar E cores and accessories
E22/6/16
Core halves for use in combination with an non-gapped E core AL measured in combination with a non-gapped core half, clamping force for AL measurements, 20 10 N, using a PCB coil containing 5 layers of 20 tracks each, total height 2.5 mm. GRADE 3C90 AL (nH) 160 3% 250 3% 315 3% 400 5% 630 8% 5150 25% 3C92 3C93 3C94 3700 25% 4300 25% 160 3% 250 3% 315 3% 400 5% 630 8% 5150 25% 3C95 3C96 3F3 6220 25% 4600 25% 160 3% 250 3% 315 3% 400 5% 630 8% 4300 25% 3F35 3F4 3500 25% 160 3% 250 3% 315 3% 400 5% 630 8% 2400 25% 3F45 3E6 2400 25% 22000 +40/-30% e 53 82 104 132 208 1700 1220 1420 53 82 104 132 208 1700 2050 1520 53 82 104 132 208 1420 1160 53 82 104 132 208 790 790 7250 AIR GAP (m) 900 490 360 280 160 0 0 0 900 490 360 280 160 0 0 0 900 490 360 280 160 0 0 900 490 360 280 160 0 0 0 TYPE NUMBER E22/6/16-3C90-A160-E E22/6/16-3C90-A250-E E22/6/16-3C90-A315-E E22/6/16-3C90-A400-E E22/6/16-3C90-A630-E E22/6/16-3C90 E22/6/16-3C92 E22/6/16-3C93 E22/6/16-3C94-A160-E E22/6/16-3C94-A250-E E22/6/16-3C94-A315-E E22/6/16-3C94-A400-E E22/6/16-3C94-A630-E E22/6/16-3C94 E22/6/16-3C95 E22/6/16-3C96 E22/6/16-3F3-A160-E E22/6/16-3F3-A250-E E22/6/16-3F3-A315-E E22/6/16-3F3-A400-E E22/6/16-3F3-A630-E E22/6/16-3F3 E22/6/16-3F35 E22/6/16-3F4-A160-E E22/6/16-3F4-A250-E E22/6/16-3F4-A315-E E22/6/16-3F4-A400-E E22/6/16-3F4-A630-E E22/6/16-3F4 E22/6/16-3F45 E22/6/16-3E6
2008 Sep 01
3
Ferroxcube
Planar E cores and accessories
E22/6/16
Core halves for use in combination with a plate (PLT) AL measured in combination with a plate (PLT), clamping force for AL measurements, 20 10 N, using a PCB coil containing 5 layers of 20 tracks each, total height 2.5 mm. GRADE 3C90 AL (nH) 160 3% 250 3% 315 3% 400 5% 630 8% 6150 25% 3C92 3C93 3C94 4410 25% 5000 25% 160 3% 250 3% 315 3% 400 5% 630 8% 6150 25% 3C95 3C96 3F3 7360 25% 5450 25% 160 3% 250 3% 315 3% 400 5% 630 8% 5000 25% 3F35 3F4 4100 25% 160 3% 250 3% 315 3% 400 5% 630 8% 2900 25% 3F45 3E6 2900 25% 26000 +40/-30% e 42 66 83 106 166 1620 1170 1320 42 66 83 106 166 1620 1950 1440 42 66 83 106 166 1320 1080 42 66 83 106 166 770 770 6900 AIR GAP (m) 950 550 400 280 160 0 0 0 950 550 400 280 160 0 0 0 950 550 400 280 160 0 0 950 550 400 280 160 0 0 0 TYPE NUMBER E22/6/16-A160-P E22/6/16-3C90-A250-P E22/6/16-3C90-A315-P E22/6/16-3C90-A400-P E22/6/16-3C90-A630-P E22/6/16-3C90 E22/6/16-3C92 E22/6/16-3C93 E22/6/16-3C94-A160-P E22/6/16-3C94-A250-P E22/6/16-3C94-A315-P E22/6/16-3C94-A400-P E22/6/16-3C94-A630-P E22/6/16-3C94 E22/6/16-3C95 E22/6/16-3C96 E22/6/16-3F3-A160-P E22/6/16-3F3-A250-P E22/6/16-3F3-A315-P E22/6/16-3F3-A400-P E22/6/16-3F3-A630-P E22/6/16-3F3 E22/6/16-3F35 E22/6/16-3F4-A160-P E22/6/16-3F4-A250-P E22/6/16-3F4-A315-P E22/6/16-3F4-A400-P E22/6/16-3F4-A630-P E22/6/16-3F4 E22/6/16-3F45 E22/6/16-3E6
2008 Sep 01
4
Ferroxcube
Planar E cores and accessories
Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 C 320 320 370 370 320 320 320 320 320 320 320 320 300 300 300 300 f = 100 kHz; B = 100 mT; T = 100 C 0.28 0.23 0.22 0.18 0.22(1) 0.18(1) 0.22 0.18 - - 0.17 0.14 0.28 0.23 - - f = 100 kHz; B = 200 mT; T = 25 C - - - - - - - - 1.5 1.2 - - - - - - CORE LOSS (W) at f = 100 kHz; B = 200 mT; T = 100 C - - 1.5 1.25 1.5(1) 1.25(1) 1.5 1.25 1.43 1.14 1.1 1.0 - - - - f = 400 kHz; B = 50 mT; T = 100 C - - - - - - - - - - 0.45 0.38 0.5 0.40 0.25 0.2
E22/6/16
f = 500 kHz; B = 50 mT; T = 100 C - - - - - - - - - - 1.0 0.75 - - 0.4 0.3
E+E22-3C90 E+PLT22-3C90 E+E22-3C92 E+PLT22-3C92 E+E22-3C93 E+PLT22-3C93 E+E22-3C94 E+PLT22-3C94 E+E22-3C95 E+PLT22-3C95 E+E22-3C96 E+PLT22-3C96 E+E22-3F3 E+PLT22-3F3 E+E22-3F35 E+PLT22-3F35
Measured at 140 C.
1.
Properties of core sets under power conditions (continued) B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 C 300 300 250 250 250 250 f = 500 kHz; B = 100 mT; T = 100 C 3.0 2.2 - - - - f = 1 MHz; B = 30 mT; T = 100 C - - 0.8 0.6 0.6 0.45 f = 1 MHz; B = 50 mT; T = 100 C - - - - 2.2 1.7 f = 3 MHz; B = 10 mT; T = 100 C - - 1.2 1.0 1.0 0.8
E+E22-3F35 E+PLT22-3F35 E+E22-3F4 E+PLT22-3F4 E+E22-3F45 E+PLT22-3F45
2008 Sep 01
5
Ferroxcube
Planar E cores and accessories
MOUNTING INFORMATION
E22/6/16
R0.8 max.
handbook, 4 columns
5.25 min.
16.3 min.
16.2 max.
CBW553
22.4 min.
Fig.3 Recommended PCB cut-out for glued cores.
2008 Sep 01
6
Ferroxcube
Planar E cores and accessories
DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS
E22/6/16
This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.
2008 Sep 01
7

▲Up To Search▲

Price & Availability of E22-3C90-A400-E

	To Download E22-3C90-A400-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .